Step Up Your Cooling Gear to Keep Workers Safer

Step Up Your Cooling Gear to Keep Workers Safer!

Cooling gear in the past hasn’t stayed cool for long and was only as cold as the water it was soaked in. But thanks to two significant leaps in this technology from a partnership between Magid® and Mission® workers can keep cooling relief at their fingertips all day long!

By M.B. Sutherland, Sr. Safety Writer, Magid

We all like to be comfortable as we work, but some working conditions are unavoidably hot. In those situations, it’s crucial to follow the 8 Simple Steps to Heat Safety…and one of those steps is body cooling PPE. Body cooling done right can not only help workers stay happier and more comfortable on the job, but it can keep them safer and help them be more productive.

Cooling gear in the past hasn’t stayed cool for long and was only as cold as the water it was soaked in. But thanks to significant leaps in this technology from a partnership between Magid® and Mission®, workers can keep cooling relief at their fingertips all day long!

MAGID COOL® POWERED BY MISSION® - HYDROACTIVE® COOLING GEAR

Magid Cool Powered by Mission’s HydroActive® cooling technology is unique in that it uses the natural power of evaporation to achieve better and more lasting cooling than garments that employ slimy-feeling chemical coatings. The special weave of these materials works by adding any temperature of water (even extremely hot water), so workers in remote locations can save their cool water for personal hydration and use less palatable water to activate their cooling PPE.

The worker simply wets the fabric, wrings out any excess water, and then waves or snaps the garment in the air. The fabric cools to as low as 30 degrees below average body temperature in under a minute and best of all, it stays cool for up to two full hours! Workers can also reactivate these fabrics an unlimited number of times through the day for an anytime solution that keeps them cool and comfortable as they work and gets them through to their next break in the shade.

Choices in Cooling PPE

A cooling towel around the neck offers incredible relief from the heat, but it may or may not be appropriate for your application. Anyone working with machinery that may catch a loose garment will need a different choice. In these cases, you’ll want to look for cooling fabrics that are available in additional forms like skull caps worn under hard hats, neck gaiters, and even short-fitting bandanas.

New Cooling Gear Options

The latest additions to the Magid Cool line take it a step further with skull caps with a nape option to keep necks cool and protected from the sun as well as a sun defender hat and a cooling safety shirt – all made with that same HydroActive cooling technology.

FR Cooling Gear

For workers in environments with flame hazards, you can get all the benefits of Magid Cool plus flame resistance! The flame resistant technology never washes out and it meets ASTM F1506 standards and is NFPA 70E compliant.

FR Gaiter

FR Towel

FR Skull Cap

While cooling PPE is only one tool in your arsenal against heat illness, it’s a key component. Be sure you’re getting the best cooling gear to keep your workers comfortable, energized, and safe!

Get more tools to keep workers safe in the heat!

GET MORE TOOLS

Step Up Your Cooling Gear to Keep Workers Safer!